Millboard Envello Board & Batten Cladding

The Antique Oak Board and Batten profile has been moulded from four individual pieces of timber with different widths and grain patterns, creating a truly unique balance for both contemporary and traditional designs. With a tongue and groove profile that only requires fixings through the tongue, so the fixing is hidden. This cladding does not warp or rot like wood but is moulded from real oak! It has no leaching or staining and is resistant to decay with UV & weathering stability.

Features:
Does not warp or rot like wood
No leeching or staining
Moulded from real oak
Resistant to decay
UV and weathering stability

Installation guide:
25 x 50mm battens should be used to install these boards at 600mm centres (reduced to 400mm in high wind or high footfall areas)
If boards are installed vertically, use 4.6 3.0m battens per m2 (ie multiply your m2 by 4.6 for the number of 3.0m battens you need)
If boards are installed horizontally, use 2.1 3.0m battens per m2 (ie multiply your m2 by 2.1 for the number of 3.0m battens you need)